Custom Label Quote

Label Quote for Primera LX400, LX800, LX810 and LX900 Color Label Printer. We can make any size and or shape labels for the Primer label printer in many different substrates.


Please refer to these diagrams when choosing the size of the labels stock. If you are using an applicator such as Primera’s AP362 be sure to order the correct size based on the diagrams. For example, if you are using an applicator you may need to order 3″ wide x 4″ high instead of 4″ wide x 3″ high.

Description: PrinterOrientation.jpg  
Description: ApplicatorOrientation.jpg

Please Note: For all sizes listed on our website, the first number is width and the second number is length. Example 2” x 1” =  2″ wide by 1″ high. Width and Height listed on the website will always correspond to the images above.

Core Diameter

Label stock is not interchangeable between LX400 and LX810/LX900 Color Label Printers. The LX810 and LX900 has 6″ (152mm) maximum diameter on a 3″ (76mm) core. The LX400 has 5″ (127mm) maximum diameter on a 2″ (50.8mm) core.  In other words, if you do not see the size available for your printer you cannot order the same size that may be available for a different printer.

Select Printer Type

Select Label Material:
Select Label Shape:
Enter Width (XX.XX):
Enter Height in inches (XX.XX):
Number of labels across:
*Note the sum of width times number of labels across cannot be greater than 8". There is a 0.125" gap between the labels across.
Number of labels:
Select number of rolls:
Perforations between labels?
Labels to be applied by:
What type of product or application is this label for?